Galileo Milano 3G Owner's Manual page 33

melody track alone. When the fingering mode is set to Fingered or
Single, the auto accompaniment section of the keyboard will not be
recorded, although the notes are sounding.
Record Auto Accompaniment Track Only
If the ACCOMP button is selected, the recording will begin as soon as a
recognized chord is played on the auto accompaniment section of the
keyboard. The REC indicator will stop blinking and stay on lighting, the
four-dot indicator will flash showing recording beat and tempo in real
time.
Note: Notes played on the Melody section of the keyboard will not be
recorded in the auto accompaniment track. If the auto accompaniment
is off, only the percussive rhythm will be recorded in the ACCOMP track.
Record the Auto Accompaniment and a Melody Track
If you want to record a melody track and the accompaniment track at
the same time, press and hold down the ACCOMP track button and a
MELODY track button at same time, both indicators will blink, then
press the REC button. Recording begins as soon as you start to play on
any section of the keyboard. The REC indicator will stop blinking and
stay on lighting, the four-dot indicator will flash showing recording
beat and tempo in real time.
5. Metronome - If you would like to have the Metronome play while you
are recording simply press the METRONOME button. It is a timing
reference when recording only melody track. The metronome sound
will not be recorded.
Note: If you use the metronome when recording the accompaniment
track, the metronome will play in place of the drum pattern of the auto
accompaniment.
6. Stop Recording and Store - Press the REC button again to stop
recording. Or when the accompaniment track is being recorded, press
the INTRO/ENDING button to stop the recording with an ending pattern
in the accompaniment track.
The recorded information will be stored in the User Song that you
selected.
Note: When the record memory is full, recording will stop automati
cally and "End" will appear on the display screen.