Arpeg; Panel Controls; Metronome; Transpose - Galileo Milano 3G Owner's Manual

ARPEG

This feature provides arpeggio based on keys you are pressing. There are 5 preset arpeggio patterns for
your selection. You may edit and save it.
Press the ARPEG button. Use the navigation and +/- buttons to select arpeggio
pattern and edit it.
Press the EXIT button or press the ARPEG button again to exit from the arpeggio
mode; if you made changes, the edited results will be saved automatically. You can
recover the factory default presetting, please refer to <SETUP> section for details.

PANEL CONTROLS

METRONOME

Press the METRONOME button to turn the metronome on or o . You can change metronome settings.
Please refer to <SETUP> section for details.

TRANSPOSE

Press the TRANSPOSE +/- button to set the transpose value ranged -6 to +6 semitones. Press both
TRANSPOSE +/- buttons simultaneously to set the transpose back to zero.

REVERB

Press the REVERB button to turn On/O the reverb e ect. You can change level and type of reverb e ect.
Please refer to <SETUP> section for details.

CHORUS

Press the CHORUS button to turn On/O the chorus e ect. You can change level and type of chorus
e ect. Please refer to <SETUP> section for details.
M I C R O G R A N D D I G I T A L P I A N O 17