Keyboard Voices; Voice Selection - Galileo Milano 3G Owner's Manual

Keyboard Voice

Voice Selection -

There are 128 GM voices in 16 groups plus 10 Asian ethnic folk instrument
voices. There is a complete list of all 138 voices in the back of the manual.
Quick Select - There are ten voices that can be selected quickly by pressing
one of the five voice select buttons. These voices are assigned to Instru-
ment Line A and Instrument Line B. Each Line consists of five voices. The
voice name in Line A is printed above the voice select button and the
voice name in Line B is beneath the button.
1. Press the A/B button to select a voice kit. Selection of the Instrument
Lines will alternate when the A/B button is pressed repeatedly. The
indicator will be lit when Line B is selected .
2. Press the voice select button that corresponds to the desired voice in the
Instrument Line you have selected. The voice name and its number
with a VOICE indicator in front will show on the display.
Selecting One Of The 138 Voices
1. Press the VOICE Button to have the VOICE indicator display in the upper
left corner of the display. The current selected voice will be shown and
the VOICE indicator will turn on.
2. Use DATA WHEEL or the +, – buttons to select a voice. The voice name
and its number will show on the display. Please refer to the back of the
manual for a list of all available voices.
Selecting Voice Via Group
1. The the UP and DOWN button can be used to select the voice group. The
group name in capital and its number with " "notation will be shown
and it will blink.
2. Press the ENTER button to confirm the group selected. Press the CANCEL
button to exit from the group mode.
3. When the group selection mode is engaged, the first voice in this group
will be shown. Use the DATA WHEEL or +, - buttons to select a single voice.
Gr . Pi a n o
G. Pi a n o
E. Pi a n o 1
GUI TAR