Table of Contents
Advertisement
Playback
- To listen to the recorded passage:
1. Press the USER SONG button, its indicator will be lit and the first User
Song name will show on the display. Use the +, – buttons to select a
song.
2. If you already have a recorded track(s) in the selected song, its indicator
will be lit automatically. If you do not wish to hear a specific track, press
the corresponding track button to turn that track off. Its indicator will
turn off.
3. Press the PLAY/STOP button to hear the recorded track(s). Its indicator
will light up. The dots of the beat indicator will flash.
You can change the tempo by pressing the +TEMPO– buttons. You
may also play on the keyboard while the recording is playing back.
4. Press the PLAY/STOP button again to stop the playback.
Playback will stop automatically when the recording reaches its end.
Exit
- Press the USER SONG button again to exit the Record Mode, the
display screen will revert to the current voice selected.
Note: The melody track can record layer or lower performance. But cannot
record layer and lower at the same time. In the record mode, when layer
or lower mode is triggered, then press another mode button, the mode
will be toggled to new one. If both layer and lower mode are engaged
before entering record, when enter the record mode, only layer mode
remains and the lower will be disabled automatically.
U. So n g - 2
Advertisement
Table of Contents
