Reverb Type .Selecting; Reverb Level Setting; Chorus Type Selecting - Galileo Milano 3G Owner's Manual

3. Use the +, – buttons or the DATA WHEEL to select harmony type. The
available harmony types are listed below:
No.
Type
Reverb Type Selection
from. The selected reverb effect is applied to entire piano, not specially for
the instrument voice.
1. In the Setup mode press the UP or the DOWN buttons until the "R.Type"
appears on the LCD Display.
R. Ty p e
2. Press the ENTER button to confirm this, Its current setting will show and
blink.
L r g . Ha l l
3. Use the +, – buttons or the DATA WHEEL to select your desired reverb
type. The available reverb types are listed below:
No. Reverb Type
01 Small Hall
04 Church
07 Echo
10 Triplet Echo

Reverb Level Setting -

1. Press the UP or the DOWN buttons until the "R.Level" menu appears.
R. L e v e l
2. Press the ENTER button to confirm, Its current setting will show and blink.
R. L e v e l
3. Use the +, – buttons or the DATA WHEEL to change the reverb effect
level. The range is 0 - 127. Press the +, – buttons simultaneously to revert
back to the default setting.
Chorus Type Selection -
from. The selected chorus effect is applied to entire piano, not specially
for the instrument voice.
1. In the Setup mode press the UP or the DOWN buttons until the "C.Type"
appears on the LCD Display.
C. Ty p e
2. Press the ENTER button to confirm this, Its current setting will show and
blink.
D. Ch o r u s
1 2 3
Duet Close Open
- There are 10 reverb types available to choose
No. Reverb Type
02 Large Hall
05 Cathedral
08 3/4 Echo
Adjust the level of reverb for the main voice.
There are 8 Chorus types available to choose
4
Octave
No. Reverb Type
03 Plate reverb
06 Gated Reverb
09 4/4 Echo