Installing A Flexiblelom Riser Assembly - HP ProLiant SL250s Gen8 Server User Manual

Install the PCI riser board assembly.
4.
IMPORTANT:
properly.
Install the server into the chassis
5.
Power up the server (on page 15).
6.

Installing a FlexibleLOM riser assembly

Power down the server
1.
Remove the server from the chassis (on page 15).
2.
If necessary, install the FlexibleLOM
3.
Install the FlexibleLOM riser assembly.
4.
Install the server into the chassis
5.
The server does not power up if the PCI riser board assembly is not seated
("Installing the server into the
("Power down the node" on page 15).
("Installing an expansion
("Installing the server into the
chassis" on page 21).
board" on page 50).
chassis" on page 21).
Hardware options installation 52