Install the PCI riser board assembly.
4.
IMPORTANT:
properly.
Connect all internal cabling to the expansion boards.
5.
Install the server into the chassis
6.
Power up the server (on page 14).
7.
Installing a FlexibleLOM riser assembly
Power down the server (on page 14).
1.
Remove the server from the chassis (on page 14).
2.
If necessary, install the expansion boards
3.
Install the FlexibleLOM riser assembly.
4.
The server does not power up if the PCI riser board assembly is not seated
("Installing the server into the
("Installing an expansion
chassis" on page 20).
board" on page 39).
Hardware options installation 41