Remove The Processor Air Baffle - HP ProLiant SL250s Gen8 Server User Manual

Remove the server from the chassis (on page 15).
3.
Place the node on a flat, level work surface.
4.

Remove the processor air baffle

To remove the component:
Power down the server
1.
Disconnect all peripheral cables from the node.
2.
Remove the server from the chassis (on page 15).
3.
Remove the front GPU module.
4.
Remove the GPU bracket.
5.
Remove the air baffle.
6.
To replace the component, reverse the removal procedure.
("Power down the node" on page 15).
Operations 16