Alto IMAGE 26B Operator's Manual page 40

CLARKE TECHNOLOGY WARRANTY (U.S. only)
This Clarke Technology Industrial/Commercial Product is warranted to be free from defects in materials and workman-
ship under normal use and service for a period of one year from the date of purchase, when operated and maintained in
accordance with Clarke Technology Maintenance and Operations instructions.
This warranty is extended only to the original purchaser for use of the product. It does not cover normal wear parts such
as electrical cable, rubber parts, hoses and motor brushes.
If difficulty develops with the product, you should:
a). Contact the nearest authorized Clarke Technology repair location or contact the Clarke Technology Service Operations
Department, 2100 Highway 265, Springdale, Arkansas 72764, for the nearest authorized Clarke Technology repair location. Only
these locations are authorized to make repairs to the product under this warranty.
b). Return the product to the nearest Clarke Technology repair location. Transportation charges to and from the repair location
must be prepaid by the purchaser.
c). Clarke Technology will repair the product and or replace any defective parts without charge within a reasonable time after
receipt of the product.
Clarke Technology's liability under this warranty is limited to repair of the product and/or replacement of parts and is given to
purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE ARE NO WARRANTIES WHICH
EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES, INCLUDING BUT NOT LIMITED TO WAR-
RANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty registration card is provided with your Clarke Technology
product. Return the card to assist Clarke Technology in providing the performance you expect from your new floor machine.
ALTO U.S. Inc., 2100 Highway 265, Springdale, Arkansas 72764.
Your new Image Carpet Extractor has a polydur Solution and Recovery Tanks. Polydur is a rotationally molded, low-
density linear polyethylene that won't crack or dent, and withstands most corrosives and temperature extremes. Clarke
Technology backs up your Polydur tanks with an eight-year guarantee. If a tank breaks, cracks or leaks under normal use
within eight years of the date of purchase, it will be replaced free.
Always use genuine Clarke Technology Parts for repair.
CLARKE TECHNOLOGY POLYDUR
EIGHT-YEAR GUARANTEE
CLARKE TECHNOLOGY reserves the right to make
changes or improvements to its machine without notice.
CLARKE TECHNOLOGY
2100 Highway 265
Springdale, Arkansas, 72764
TANK
®