Battery Cart Instructions - Alto IMAGE 26B Operator's Manual

1. Traverse motor forward and park on firm
level surface.
2. Turn key switch to off position.
3. Lower recovery tool to stabilize machine
when batteries are removed.
4. Open front cover (A) and lower front
bridge by grasping handle (B) and
pulling up firmly to insure handle is
extended fully.
5. Lower bridge (C).
6. Unplug battery pack.
7. Dock empty battery cart to slots (D) in
front bridge.
8. Pull back on cart to insure latching
mechanism is fully engaged.
9. Release lever on side of battery tray (E)
and hold down as batteries are rolled
onto cart.
10. Release lever on tray and verify that
lever is engaged in slot on battery cart
(F).
11. Step on foot lever on battery cart to
disengage cart from bridge (G).
12. Replace battery pack by doing the
steps above in reverse order.
Clarke Technology Operator's Manual IMAGE 26B
CLARKE TECHNOLOGY Image 26B
Instructions for using Optional Battery Cart (10010A)
to Remove and Replace Batteries 1/01
B
D
C
E
F
Page -33-
A
G