Driver Installation For Windows 2000 Or Windows Me - IBM 6633 - 4LE User Manual

Monitor Driver Installation

Driver installation for Windows 2000 or Windows Me

To use the Plug and Play feature in Microsoft Windows 2000 or
Microsoft Windows Millennium Edition(Me) files should be loaded
from the IBM Monitor CD.
1.
Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to
boot into Windows 2000 or Windows Me.
4. Open the
DISPLAY PROPERTIES
CONTROL PANEL
5. Click the
SETTINGS
6.
Click the
ADVANCED
7.
Click the
MONITOR
8.
Click the
PROPERTIES
9. Click the
DRIVER
10. Open the
UPGRADE DEVICE DRIVER WIZARD
and then Click the
DRIVER
11. Select the "Display a list of the known drivers for this device so that I
can choose a specific driver" and then Click the
12. Insert the IBM Monitor CD into the CD drive: and click the
button.
13. Click OK.
14.
Ensure that the CD drive letter is selected.
15.
Choose IBM E52 monitor and Click OK. The files will be copied from
the CD to your hard disk drive.
16.
Close all open windows and remove the CD.
17.
Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
window by clicking
and then double - clicking on the
tab.
button.
tab.
button.
tab.
button.
NEXT
A5
,
START SETTINGS
icon.
DISPLAY
window by clicking on
button.
NEXT
HAVE DISK
,
UPDATE