Table of Contents
Advertisement
Driver Installation for Windows 2000 or Windows Me
This section must be
completed before
continuing with the
Windows 2000, Windows
Auto Setup
Me
on page 13
On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display quality.
IBM recommends using either
1280 x 1024 at a refresh rate of
60Hz or 640 x 480 at a refresh
rate of 60Hz.
To use the Plug and Play feature in Microsoft
Windows Millennium Edition(Me) files should be loaded from the IBM
Monitor CD.
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to boot
into Windows 2000 or Windows Me.
4.
Open the
DISPLAY PROPERTIES
CONTROL PANEL
5.
Click the
SETTINGS
6.
Click the
ADVANCED
7.
Click the
MONITOR
8.
Click the
PROPERTIES
9.
Click the
tab.
DRIVER
10. Open the
UPGRADE DEVICE DRIVER WIZARD
and then Click the NEXT button.
UPDATE DRIVER
11. Select the "Display a list of the known drivers for this device so that I can
choose a specific driver" and then Click the NEXT button.
12. Insert the Setup CD into the CD drive : and click the
13. Click OK.
14. Ensure that the CD drive letter is selected.
15. Choose IBM ThinkVision L170 monitor and Click OK. The
files will be copied from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
®
window by clicking
and then double-clicking the
tab.
button.
tab.
button.
®
Windows
2000 or Microsoft
,
START
SETTINGS
icon.
DISPLAY
window by clicking on
button.
HAVE DISK
,
9
Advertisement
Table of Contents
