Bernina 700D Owner's Workbook page 70

M
ASTERING
Y
OUR
BERNINA
®
Creating and Attaching Corded Piping
Fabric:
Needle:
Thread:
Presser Foot:
• Owner's manual pg.___
• Following the instructions in the Owner's manual thread the serger for a 4-thread overlock stitch using
both needles.
• Set all thread tension levers to normal (3-5).
• Set stitch length to 3mm.
• Attach the Attachment Base.
• Attach the Multi-Purpose Foot and Guide following the directions in the instruction manual for the
Multi-Purpose Foot with Guide.
• Place the 3" x 8" fabric under the foot.
• Insert the cord into the guide.
• Wrap the bias strip around the cord and place the wrapped cord in the groove under the foot and on
top of the other fabric.
• Serge, making the covered cord and attaching it to the fabric strip in one stitching.
• Press the seam allowance to the wrong side of the fabric strip.
• Mount the sample.
BERNINA
M Y
ASTERING OUR
MULTI-PURPOSE FOOT
Medium weight cotton bias strip, 2" x 8"
Medium weight cotton, 3" x 8"
12" of 3 / " cotton cording
8
80/12 Stretch
4 cones of serger thread
Multi-Purpose Foot with Guide (optional accessory)
Attachment Base (optional)
1/04/02
®
BERNINA
®
700D/800DL
700D/800DL/70