Bernina 700D Owner's Workbook page 22

M
ASTERING
Y
OUR
BERNINA
®
N
• Owner's manual pg.___
• Thread the serger for a 4-thread overlock stitch.
• Set all thread tension levers between 3-5 (normal).
• Using a fabric marker, divide the fabric in half along a 6" side.
• With right sides together and a ¼" seam allowance, serge to the mark on the fabric.
• Without removing the fabric from under the presser foot, notice the "ripple" effect where
the fabric has stretched.
• Locate the differential feed dial on the serger.
• Adjust the dial to 1.5.
• Seam the jersey to the end of the fabric.
• Remove the fabric from under the presser foot and observe the decreased "rippling".
• Return the differential feed dial to "N" for normal.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
SEAMING KNIT FABRICS
Differential Feed
Fabric: 2 pieces cotton single knit jersey,
3" x 6" (stretch across the 3" side)
Needle: 11/75 Stretch or Ballpoint
Thread: 2 cones of serger thread (needles)
2 cones of Woolly Nylon (loopers)
Presser Foot: Standard
1/04/02
®
BERNINA
®
700D/800DL
1.5
700D/800DL/22