Bernina 700D Owner's Workbook page 58

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Set the serger for a wide 3-thread overlock stitch (left needle) with Jeans Stitch
upper looper.
• Set the thread tension levers for a 3-thread flatlock stitch as directed in the Owner's manual.
• Adjust the stitch length to 3mm. (You can shorten the stitch length slightly to fill in the stitch as
you serge.)
• Fold the fabric in half, wrong sides together, to 2" x 6".
• Optional: Attach the Attachment Base and the Right Seam Guide. Move the Right Seam Guide
halfway between the needle and the stitch finger.
• Place the fold under the foot. Guide the fabric halfway between the left needle and the right
edge of the stitch finger (or against the Right Seam Guide).
• Slowly serge the fabric. The looper threads will extend beyond the fabric on the right side of fold.
• Gently pull the fabric flat
• Return stitch length and thread tension levers to normal.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
THREE THREAD FLATLOCK
Fabric:
Needle:
Thread:
Presser Foot:
1/04/02
®
BERNINA
Sweatshirt fleece, 4" x 6"
80/12 Universal
2 cones of serger thread
1 cone of Jeans Stitch
Standard
®
700D/800DL

by YLI

in the
700D/800DL/58