Maintenance; Aluminum Filter; Light Bulbs - Vissani QR027 Use And Care Manual

Maintenance

FILTERS
When filters wear out, replace them with similar filters that have
stainless steel clips. Also replace filters that are damaged with
punctures, bends, or broken frames .
- Turn off the range hood and disconnect the power .
- Remove the aluminum filter by gently pulling the handles
and sliding it out .
- Replace with an equivalent filter, then reconnect the power.

LIGHT BULBS

When light bulbs burn out, replace them with a 25W or 35W /JDR
16, GU10 twist and lock base light bulbs .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb (2) counter-clockwise to remove it .
- Insert a new bulb (3) and turn it clockwise to install it . Do
not release the bulb until you are sure the bulb has been
securely installed . Reconnect the power .
- If new bulbs do not operate, ensure that they are inserted
correctly .
DANGER: Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance.
Touching circuitry inside the range hood while it is
energized will result in death or serious injury .
WARNING: Failure to replace worn out or damaged filters
nets will increase the risk of fire.
1
WARNING: Light bulbs can become extremely hot when
turned on . Do not touch bulbs until they are switched off
and cooled . Touching hot bulbs could cause serious burns .
15
Please contact 1-800-514-6729 for further assistance .
2
3
HOMEDEPOT .COM