Maintenance; Replacing Filters; Replacing Light Bulbs - Vissani QR050 Owner's Manual

Maintenance

REPLACING FILTERS

When filters need replacing, exchange with similar. Also replace
filters that are damaged with punctures, bends, or broken
frames .
- Turn off the range hood and disconnect the power .
- Remove the filters (1) by pulling the handles (2).
- Replace with an equivalent filter, then reconnect the
power .

REPLACING LIGHT BULBS

When light bulbs burn out, replace them with LED or halogen
JDR16, GU10 twist and lock base light bulbs (MAX. 35 watts).
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb (1) clockwise and pull it out to remove it .
- Push in the new bulb (2) and turn it counter-clockwise.
Do not release the bulb until you are sure the bulb has
been securely installed . Then reconnect the power .
- If new bulbs do not operate, ensure that they are
inserted correctly .
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
Failure to replace worn out or damaged filters
WARNING:
will increase the risk of fire.
A
1
WARNING:
Light bulbs can become hot when turned on .
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
2
14
2
1