Vissani QR027 Use And Care Manual page 12

Installation (continued)
INSTALLING THE DAMPER (IF NECESSARY)
WARNING: Sharp edges . Wear safety gloves .
CAUTION: Be very careful when installing the dampers .
Applying too much force or bending the damper too much
may damage or break the damper hinge ends .
The damper is pre-installed at the factory . Make sure that it has
not come loose during shipping and re-install it, if necessary .
- Insert one end of the damper (3) into the hinge slot (4) at
the top of the range hood (A) .
- Gently bend the damper (3) and insert its other end into the
hinge slot (4) .
INSTALLING THE RANGE HOOD
CAUTION: Make sure the range hood is secure before
releasing it .
- Lift the range hood (A) into position, engaging the two hood
brackets (D) with the two lower toggle bolts (DD) .
A
DD
D
Wall
4
A
ATTACHING THE DUCT
- Attach your ducting (F) to the range hood (A) and connect
the duct to your exterior exhaust system.
A
12
3 3
F