Wake-On-Keyboard/Wake-On-Mouse
Important:
The power button will not function once a keyboard
password has been set in the KB Power On Password
field of the Integrated Peripherals submenu. You must type
the correct password to power-on the system. If you forgot
the password, power-off the system and remove the
battery. Wait for a few seconds and install it back before
powering-on the system.
The 5VSB power source of your power supply must
support ≥ 720mA.
Wake-On-USB Keyboard
Important:
The 5VSB power source of your power supply must support
≥ 1.5A.
RTC Timer to Power-on the System
Introduction
1