Lcd Tft 2.0 - Sony Ericsson W395 Working Instruction, Mechanical

Reassembly
Check the alignment and tighten the four Screws (M1.4x1.5)
using the JCIS No.0 Screw Bit to a torque of 10 Ncm.
5.5

LCD TFT 2.0

Lift up the Upper Keypad Assy(1) and carefully slide the
LCD FPC(2) into the slot (between Upper Keypad Assy and
Upper Rear Assy) as shown in the picture.
Place the LCD TFT 2.0 into Upper Rear Assy and press to
snap it in position.
Carefully unfold the Upper Keypad Assy (1) and insert the
LCD FPC (2) to the connector using the Flex Film Assembly
Tool.
Insert the LCD FPC to the bottom of the connector!
1223-6753 Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
55(59)