Lower; Hinge Assy; Lower Front Cover - Sony Ericsson W395 Working Instruction, Mechanical

Reassembly
5.2

Lower Front Cover

Make sure all the side keys and M2 Cover are in
postion!
Place the Lower Front Cover onto the Lower Rear Assy.
Press to snap it until the two covers are jointed without any
gaps.
Tighten the two Screws (M1.7x5) using the Torx Bit No. 4 to
a torque of 17 Ncm.
5.3

Hinge Assy

Make sure the Hinge Assy is in its open position!
Carefully thread the H-H FPC into the Hinge Assy as shown
in the picture.
Be careful not to damage the H-H FPC during the
operation!
1223-6753 Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
52(59)