Reassembly; Lower Rear Assy And Pba - Sony Ericsson W395 Working Instruction, Mechanical

5

Reassembly

The reassembly is done in the following order:
1. Lower Rear Assy (a) and PBA (b)
2. Lower Front Cover
3. Hinge Assy
4. Upper Rear Assy
5. LCD TFT 2.0
6. Front Cover Assy (a) and Bezel Assembly (b)
7. Battery (a) and Battery Cover Assy (b)
5.1 Lower Rear Assy and
PBA
Place the PBA onto the Lower Rear Assy.
Press to snap the hooks as shown in the picture.
Tighten the two Screws (M1.7x5) using the Torx Bit No. 4 to
a torque of 17 Ncm.
1223-6753 Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
51(59)