Protection Foil For Test Point - Sony Ericsson W395 Working Instruction, Mechanical

Replacement

4.19 Protection Foil for Test Point

Follow the 3.1 – 3.5 Disassembly instructions!
Follow the 4.19 Removal instructions!
Follow the 4.20 Removal instructions!
Carry out the replacement as described below.
Follow the 4.20 Installation instructions!
Follow the 4.19 Installation instructions!
Follow the 5.3 – 5.7 Reassembly instructions!
REMOVAL
Peel off the Protection Foil using the Flex Film Assembly
Tool.
INSTALLATION
Place a new Protection Foil in position as shown in the
picture.
Press to secure the attachment.
1223-6753 Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
35(59)