Upper Rear Assy - Sony Ericsson W395 Working Instruction, Mechanical

Reassembly
Tighten the Screw (M1.4x2.8) using the JCIS No.0 Screw
Bit to a torque of 10 Ncm.
5.4

Upper Rear Assy

Carefully thread the H-H FPC into the Upper Rear Assy as
shown in the picture.
Insert the H-H FPC to the connector on the Upper Keypad
Assy using the Flex Film Assembly Tool.
Insert the H-H FPC to the bottom of the connector!
Lock the connector using the Flex Film Assembly Tool.
1223-6753 Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
54(59)