Specifications - Panasonic DVCPRO AJ-CA901 Operating Instructions Manual

Digital triax camera adapter
Table of Contents

Advertisement

Specifications

Input:
100 V DC (supplied by AJ-BS901)
12V DC IN (11.5 V to 17.0 V DC)
Power consumption: BS Input 100 V : 450 mA
EXT Input 12 V : 3.2 A
Indicates safety information.
External dimensions (W a H a D):
Weight:
Operating temperature range:
Storage temperature range:
Operating humidity:
Transfer block
Signal transfer rate:
Transfer distance:
Video transfer rate:
Audio transfer rate:
Intercom
Microphone selection:
I/O level:
Format:
Lines:
S/N ratio:
Distortion:
Frequency range:
Dynamic range:
Video system
Teleprompt output (PROMPT):
RET output:
Input connectors
Intercom connector:
External DC power supply input connector: XLR 4-pin
RET SW connector:
Output connectors
Teleprompt (PROMPT) output connector: BNC VBS, 1 Vp-p, 75 Ω
RET signal output connector:
External power supply output connector:
PGM audio output connector:
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
6-3/16 a 7-9/16 a 6-13/16-inches
(156.5 a 191.5 a 173 (mm))
4.84 lbs (2.2 kg)
32°F to 104°F (0°C to 40°C)
–4°F to 140°F (–20°C to +60°C)
10 to 85% (relative humidity)
360 Mbps (AJ-CA901 to AJ-BS901)
300 m with diameter 8.6 mm cable (Fujikura)
500 m with diameter 14.5 mm cable (Fujikura)
Signals from camera to base station:
Y signal:
18 MHz sampling rate, 10-bit
R-Y signal:
9 MHz sampling rate, 10-bit
B-Y signal:
9 MHz sampling rate, 10-bit
Signals from base station to camera:
RET signal:
FM modulation
Prompt signal: FM modulation
Signals from camera to base station:
46.875 kHz sampling rate, 16-bit
Signals from base station to camera:
11.71875 kHz sampling rate, 16-bit
Switchable between dynamic microphone and carbon microphone
4-line/2-line: 0 dBm (600 Ω, balanced)
1 Vp-p (200 Ω)
RTS:
0 dB (600 Ω, balanced)
PGM:
Selectable between 4-line, 2-line, and RTS
Base station to camera: 2 lines (ENG, PGM)
Camera to base station: 1 line (ENG)
50 dB or more (base station to camera) (camera to base station)
1.0% or less
100 Hz to 10 kHz (± 3 dB) (camera to base station)
100 Hz to 5 kHz (± 3 dB) (base station to camera)
12 dB or more
1 Vp-p (1 Vp-p input to AJ-BS901)
1 Vp-p (1 Vp-p input to AJ-BS901)
XLR 5-pin
8-pin
BNC VBS, 1 Vp-p, 75 Ω
XLR 4-pin
XLR 3-pin
9

Advertisement

Table of Contents
loading

Table of Contents