Infinite FINA250 User Manual page 58

11.3.3 Adjustment of Step Correction
Open file: C:\try\SmallGrid126.group£ ¬
Click " "button to print, adjust the value in Adjustment \ Rectangle till the printing pattern is even grid
and lines aligned, then save the value.
If the printing pattern has interval, reduce the value, if pattern overlap increase the value. Other step
corrections in different modes are the same way above.
Observe the step using magnifying loupe:
Step corrections are different according to different printing modes, so each printing mode should be
corrected.
If certain mode is in common use, users can print in the mode and adjust ht value in Adjustment \ Rectangle.
FINA250 Ó Ã » § Ê Ö ² á
"printing option" select test mode, single direction, "C" color.
Figure 11-12 Step Adjustment
- 54 -