Infinite FINA250 User Manual page 30

FINA250 Ó Ã » § Ê Ö ² á
After you pressing ENTER, LCD will display as below:
PH Heater
Used to control the temperature of print head when it is printing.
After you pressing ENTER, LCD will display
stands for the present temperatures of front/rear platform are
45°C. Press
After you pressing ENTER, LCD will display as below:
OFF
Press
Under standby state, put the press rob up then down, the LCD
will display:
Media Detect
Menu
Warn2
After you pressing ENTER, printer detects the media
automatically. Press
Finish detection, LCD will display OK and save the data and
offset as the original printing position. Displays Error stands for
the detection is unsuccessful and the original position is not
changed. This function is unusable for this printer.
After you pressing ENTER, LCD will
display
Media Offset
Sum of this date and media detection data will be the data of
original printing position.
This function is unusable for this printer.
Fan Volocity
It can be adjusted frome level 1-10.
Used to set the negative pressure value of ink supplying system.
T Neg. Pressure
After setting, observe the negative pressure watch behind the
printer, ensure the value is between -1.3 and -1.4. This function
is unusable for this printer.
Menu PH Heater (°C)
Offline 0045
keys to adjust the value.
Menu Media Detect
Offline Off
keys to set to ON.
Media Detect
Star:0000mm
Lenth:0000mm
ESC, exits the detection.
¡ ° XXXX¡ ± ,then press
- 26 -
¡ ° 0045 ¡ ±
keys to adjust the value.
,