Table of Contents
Advertisement
12. Click "Printing Project" to print.
13. LCD displays as below when printing:
If clog while printing£ ¬ pause printing by pressing ONLINE for 3 seconds (this operation is usable only when
printer is printing back to original position). Now clean the print head, after cleaning, press ONLINE to
continue printing.
Cleaning procedure:
Press ONLINE key for a pause then select "Move to Cleaning Position" in menu, the print head will
move to cleaning position. Now press the positive pressure button to start positive pressure cleaning, then
wipe the print head with cleaning stick. Finished, pause for 5-10 seconds, then select "Continue" to continue.
14.
Press ONLINE when the printing is all finished. Then the printer is under the Offline mode.
Note: If users want to cancel during printing, usually operate in RIP. If users want to cancel directly, press
OFFLINE until "Cancel" appears in LCD.
FINA250 Ó Ã » § Ê Ö ² á
PRINT PROJECT
LINE£ º TOTAL£ º
FINSH£ º
ONLINE DATA£ º
XXXX
XXXX
XXXX
- 31 -
Total lines
Finished lines
RIP ready lines
Advertisement
Table of Contents
