Infinite FINA250 User Manual page 27

FINA250 Ó Ã » § Ê Ö ² á
Horizontal speed has three levels as
After you pressing ENTER, it displays as follow:
Print Speed
Press
Speed higher, print quality lower.
choose speed Norm better, optimal is Low.
After you pressing ENTER, it displays
Feed Speed
press
Higher speed, faster media moving.
After you pressing ENTER, it displays
Press
Firing Vol
after each cleaning and the quantity of
the default value is 20.
Used to set flash mode by number.
0 stands for not flashing in printing.
Number from 1 to 9 stands for printing 1 PASS, flushing once.
Menu
Offline
£ ¨ When number is 1 to 9, the printer only flushes.)
Flash Mode When number is more than 9, printer automatically starts
negative pressure cleaning.£ ©
Menu
Offline
Number is 10 stands for printing 10 PASS, negative pressure
cleaning once.
Max number is 300.
Menu 3¡ ¢ Print Speed
Norm
Offline
to adjust the value.
keys to adjust the value from High to Normal to Low
keys to adjust value to set the quantity of printing ink
6¡ ¢ Flash Mode
0009
Vacuum Off
6¡ ¢ Flash Mode
0010
Vacuum On
- 23 -
High£ ¬ Norm and Low.
It is recommended to
¡ ° Norm ¡ ±
¡ ° XXXX¡ ± number£ ¬
Firing in flush mode,
, then