Infinite FINA250 User Manual page 23

4) FUNC£ º Switch to special function; In standby state, press FUNC+
3¡ ¢ Basic Operation
After turning on printer, Y motor self-tests first and then X motor, print head self-test.
After self-testing, carriage goes back to the original position. You will see the following
information displayed on the LCD screen:
•
Mark /// INFINITI with machine model
•
Version
Then back to basic operation menu.
6.1.2 Menu Description in Details
"+" stands for containing submenu. "– " stands for containing no submenu.
In this case, press key to circularly display these six menus up and down. Main menu contains:
/
—> 1. Ink Status
2. Heat Status
3. Cleaning Tool
4. Print para
5. Application
6. Engineer Set
Press FUNC+
When"£ - >"points to "1. Ink Status", press ENTER, then the LCD will display as below:
FINA250 Ó Ã » § Ê Ö ² á
Booting
V1.13
Check ¡ ª >Print head
MENU
OFFLINE
+
+
+
+
+
+
keys to print test bar.
>System
>Y Motor
>X Motor
1. Ink Status +
2. Heat Status +
3. Cleaning Tool +
4. Print para +
Ink Supply State
Heating State
Cleaning Tool
Print Parameter Set
Application Set
Factory Set
- 19 -
key to print test bar.