Infinite FINA250 User Manual page 18

52
1¡ ¢ LCD Panel: Setting and Operating Functions
2¡ ¢ Heating Platform: Heating print media, making ink dry quickly.
3¡ ¢ Pick up Roller: Picking Media
4¡ ¢ Pressing Wheel: Press media and make media smoothly
5¡ ¢ Media Stretch Roller: used to make media smoothly.
6¡ ¢ Chain: used to support ink pipe and power cable.
7¡ ¢ Y Grating Bar: Used to count the time of horizontal motions and ensure the pricision of printing in Y
direction.
8¡ ¢ Y Strap: Used to drive print head move horizontally.
9¡ ¢ Guid Bar: Track of print head motion.
10¡ ¢ Clamp£ º Manually adjust media width
11¡ ¢ Printing Board£ º Platform for printing
12¡ ¢ Pressing Wheel Control Pole£ º Control pressing wheel up / down for media feeding
13¡ ¢ Power Switch: power on/off the printer.
14¡ ¢ Print Head Frame: Used to assemble print head on it.
15¡ ¢ Heating Pipe: Used to heat print head frame.
16¡ ¢ Print Head: Xaar126 piezoelectrical print head.
17¡ ¢ Flash Ejection Print Frame: Used to prevent the ink eject out.
18¡ ¢ Flash Ejection Box: Used to vent waste ink.
19¡ ¢ Wet-keeping Frame: To keep print head wet and prevent ink in it from dry.
20¡ ¢ Air Bells Blade: For print head negative pressure cleaning.
21¡ ¢ Waste Ink Groove£ º
FINA250 Ó Ã » § Ê Ö ² á
53
Figure 4-17 Blowing System
Collect the waste ink during cleaning.
54
- 14 -
51
55