Warnings And Safety Information - Fisher & Paykel GC36 Installation Information

WARNINGS AND SAFETY INFORMATION

WARNING!
This appliance shall be installed in accordance with
US
the installation requirements of the local gas
authority or the appropriate installation code or in the
absence of local codes with the latest National Fuel
Gas Code ANSI Z223.1 or CAN B149.1,2(Canada).
Local building and electrical codes must be adhered to.
When this appliance is installed it shall not be used
as a space heater.
No combustible material or products should be
placed on this appliance at any time.
Do not spray aerosols in the vicinity of this appliance
while it is in operation.
Not to be installed in a bathroom or
bedroom/sleeping quarters.
Flexible appliance connectors shall meet the
requirements of ANSI Z21.24 and State Boards.
They shall not exceed 36 inches in length.
2
WARNING
Electrical Shock Hazard
Disconnect power before
servicing the product.
Failure to do so could result in
death or electrical shock.
WARNING
Cut Hazard
Beware of sharp edges.
Use the polystyrene ends
when carrying the product.
Failure to use caution could
result in minor injury or cuts.
CAUTION!
In order to avoid hazard these products must be
installed according to these instructions.
This product should not be sealed into the bench
with silicone or glue. This will make any future
servicing difficult. Fisher & Paykel will not be liable
for costs associated with releasing such products,
nor for damage incurred as a result.
IMPORTANT!
This product must be installed by an authorized
person (WARNING this product must be installed by
a licensed plumber or gas fitter when within the
Commonwealth of Massachusetts)
Please leave these instructions with the appliance.
Inform the customer to retain for future reference.
This product is supplied with an additional label
containing the model and serial numbers. It may be
affixed to the underside of the product, the inside of
a cupboard or to the User Guide.