Maximum Speed Indicator; Mode Switch - GENDRON REGENCY XLC 7700 Owner's Manual

3.3 Maximum Speed Indicator

This is a gauge that shows the maximum speed setting of the wheelchair. There
are five speed settings - step 1 is the lowest speed and step 5 is the highest
speed. For details of how to change the maximum speed setting, see section 3.4
below.

3.4 Mode Switch

The mode switch is used to make maximum speed changes and to change
between wheelchair operation modes.
If the mode switch is pressed while you are driving, the maximum speed setting
will be increased by one step. Each successive operation of the mode switch will
increase the setting, when the setting is at 5 the next mode switch operation will
put the setting to 1. The diagram below explains this action.
Fig. 3 Operation of Mode Switch While Driving
20