Vga Driver Installation - Aaeon PCM-6892 User Manual

All-in-one single board computer onboard via c3 ebga cpu with lcd, lvds, tv-out, audio, dual ethernet, cfd, pcmcia, & 4 usb

Hide thumbs Also See for PCM-6892:

Table of Contents

VGA Driver Installation

Windows 9x/ME/2000/XP

1. Insert the PCM-6892 CD Diskette into the CD ROM Drive.

2. From the CD ROM, select the PCM-6892/Driver/VGA/Windows

9x_ME folder to double click on the Setup.exe icon.

Notice:We take the VGA installation under Windows 98 for example

here, please choose the corresponding folder depending on your

OS.

A driver installation screen will appear, please follow the onscreen

instructions to install the driver in sequence.

3. At last, click the Finish button.

Installation process is complete and allows the system to reboot.

Windows NT 4.0

1. Insert the PCM-6892 CD Diskette into the CD ROM Drive.

2. Start system with Windows NT 4.0 installed.

IMPORTANT: When the "Please select the operating system to

start..." message is displayed, select "Windows NT Workstation

Version 4.00 [VGA mode]".

3. From Start, select the Settings group, then click on the

Control Panel icon.

4. In the Control Panel, double click on the Display icon.

5. In the Settings screen, click on the Display Type... button.

6. From the Display Type screen, and in the Adapter Type section,

click on the Change... button.

Chapter 4 Driver Installation 81

Table of Contents