Table of Contents
Advertisement
7. In the Change Display screen, click on the Have Disk... button.
8. Key in the path: cd-rom: \Driver\VGA\Windows NT 4.0, then
click on the OK button.
"cd-rom" : the drive letter of your CD-ROM drive
9. From the list of displayed S3 devices, select your S3 device.
10. From Third-party Drivers, click on the Yes button to proceed.
11. If a message appears stating the driver is already installed on
the system, and asks if you want to use the current or new drivers,
be sure to select the New button.
12. If prompted for the driver diskette a second time, click on the
Continue button.
13. When the message The drivers were successfully installed is
displayed, remove the display driver diskette, then click on the OK
button.
14. Back at the Display Type window, click on the Close button.
15. Back at the Display Properties window, click on the Close
button.
16. When you see the System Settings Change window, asking if
you wish to restart your computer, click on the Yes window to
reboot now.
NOTE: If installing Windows NT 4.0 with the S3 device currently
installed in the system:
Proceed through the Windows NT installation as normal. The
installation program will prompt the user to choose a display mode.
Choose the Cancel button from the Display Settings screen to
ignore this step for now. The installation will now finish. Once
Windows NT has started for the first time, proceed to follow the
steps outlined above to install the driver for your S3 device.
82
PCM-6892 User Manual
Advertisement
Table of Contents
