Table of Contents
Advertisement
12. Click on the Yes button to restart your computer. The system
will auto-dect the second Ethernet controller and complete its
driver installation. Just Click on the Yes button to restart your
computer again to allow dual ethernets to take effect.
Windows NT 4.0
1.Insert the PCM-6892 CD Diskette into the CD ROM Drive.
2. From Start, select the Settings, then click on the Control Panel
icon.
3. Double click on the Network icon. A Network Configuration
screen will appear and show: Windows NT Networking is not
installed. Do you want to install it now? Click on the Yes button.
4. Select Wired to the network and click on the Next button.
5.Click on Have Disk button after you click on Select From List
button. Key in the following path: cd-rom:
Driver\Ethernet\Windows NT 4.0
"cd-rom" : the drive letter of your CD-ROM drive
6. A Select OEM Option screen appears and shows : Realtek RTL
8139/810X Family PCI Fast Ethernet Adapter. Click on the OK
button.
7. Click on the Next button.
8. Click on the Next button.
9. Click on the Next button.
10. Click on the Next button. The system will ask you to insert
Windows NT CD Diskette. Follow its instructions to complete the
setup procedures.
11. Restart your computer to allow dual ethernets to take effect.
Chapter 4 Driver Installation 89
Advertisement
Table of Contents
