First/Second/Third Boot Device
The BIOS attempts to load the operating system from the devices in
the sequence selected in these items.
The choices: Floppy, LS120, HDD0, HDD1, HDD2, SCSI,
CDROM, ZIP100, Disabled.
Boot Other Device
If your boot device is not included in the following choices Floppy,
LS120, HDD0, HDD1, HDD2, SCSI, CDROM,ZIP100 you may set
First/Second/Third Boot devices to "Disable" and enable the
BOOT Other Device function. The system will automatically boot
the other device.
The choices: Enabled, Disabled.
Swap Floppy Drive
This field is effective only in systems with two floppy drives.
Selecting enabled assigns physical drive B to logical drive A, and
physical drive A to logical drive B.
The choices: Enabled, Disabled.
Boot Up Floppy Seek
When Enabled, the BIOS tests (seeks) floppy drives to determine
whether they have 40 or 80 tracks. Only 360-KB floppy drives have
40 tracks; drives with 720 KB, 1.2 MB, and 1.44 MB capacity all
have 80 tracks. Because very few modern PCs have 40-track floppy
drives, we recommend you to choose "Disabled" to save time.
The choices: Enabled, Disabled.
Chapter 3 Award BIOS Setup
47