Table of Contents
Advertisement
Option
Definition
Power Off
To allow the system to be in shutoff state
Power On
To allow the system to be started automatically.
Last State
To allow the system to keep the pre-power off state.
Power-On by PCI Card
To start the PCI device.
Wake-Up by PCIE
To wake up PCIE.
RTC Resume
If [Enabled] is selected, you can start the system through real-time clock.
3.5 Boot setup
Quick Boot
If this item is set as Enabled, the system can be started within five
seconds and some detection items will be ignored. The options are
[Disabled] and [Enabled].
Quiet Boot
Start the system quietly.
Add-On ROM Display Mode [Force BIOS]
This item allows you to set the display mode of the device's firmware
program. The options are [Force BIOS] and [Keep Current].
Figure 3.8
25
Advertisement
Table of Contents
