Installing Memory Card - OEM ITX-780G2 User Manual

2.3 Installing memory card

Please install the memory card in accordance with the following
procedures:
1) Remove the white tenon at the two ends of the interface slot
for the memory card;
2) Align the golden finger of the memory card to the groove of the
interface slot and pay attention the concave hole of golden
finger should be aligned to the convex point of the slot;
Remove outward the white tenon at
the two ends of the interface slot
for module of the memory card.
3) Finally, insert the memory card into the interface slot gently. If
no error occurs at the moment, insert the card forward in the
slot till the white buckle is automatically engaged in the con-
cave hole at the two sides of the memory card.
In order to avoid damages to the motherboard or the components,
the user must make sure the power supply to the computer is
turned off before the memory card or other system component is
installed or removed. As the groove is set at the golden finger of the
DDRII DIMM memory card, the memory card can only be inserted
into the slot with one direction. During installation, the user only
needs to align the golden finger and the dual-channel groove of the
interface slot and insert it gently. To avoid damage, never apply
excessive force in that process.
Figure 2.3
Note
8