Table of Contents
Advertisement
9) IDE 1 (Wire-harness receptacle for hard disk)
One IDE wire-harness receptacle is set on this motherboard. It can
be connected to one IDE wire harness and each wire harness can be
connected to two IDE devices. Insert the blue plug of the wire
harness into the IDE1 receptacle on the mother board, and insert the
other end into the IDE device. Normally, Pin 1 of the wire harness is
marked with red color. Please insert into corresponding Pin 1 of this
receptacle. See Figure 2.13.
Figure 2.13
15
Advertisement
Table of Contents
