Swap Floppy Drive; Boot Up Floppy Seek; Boot Up Numlock Status; Gate A20 Option - OEM 6513WU Reference

First/Second/Third Boot Device, Boot Other Device
This item sets the sequence of booting, i.e., which drive to search first for the
operating system.

Swap Floppy Drive

This feature allows you to exchange the drive names of the two floppy disk
drives, if installed. Make sure that Drive A and Drive B item in the Standard
CMOS Features menu are updated accordingly.

Boot Up Floppy Seek

This item sets if the system will verify the floppy disk drive type during POST.

Boot Up Numlock Status

This item sets if the Num Lock key will be automatically activated after system
startup.

Gate A20 Option

This item uses the fast gate A20 line to access any memory above 1MB.
Setting this item to make the access faster than the normal method.

Typematic Rate Setting

This item sets if the typematic rate is to be used. When disabled, continually
holding down a key on your keyboard will generate only one instance. In other
words, the BIOS will only report that the key is down. When the typematic rate
is enabled, the BIOS will report as before, but it will then wait a moment, and, if
the key is still down, it will begin the report that the key has been depressed
repeatedly. For example, you would use such a feature to accelerate cursor
movements with the arrow keys.
When this item is set to Enabled, the following two sub-items appear.
Typematic Rate (Chars/Sec)
This item sets the rate (in characters/second) at which the keys are accelerated.
Typematic Delay (Msec)
This item sets the delay (in msecond) between when the key was first
depressed and when the acceleration begins.
25