Table of Contents
Advertisement
Legacy USB Support
This item is used for enabling or disabling the supports for USB
devices. If the default value [Auto] is selected, the system will auto-
matically check whether USB device is available in its startup process.
If USB device is available, USB controller will be activated. If not, it
won't be activated. If you set this item as [Disabled], the USB con-
troller inside the system will be in OFF state, regardless of whether
USB device is available. The options are [Disabled], [Enabled] and
[Auto].
USB2.0 Controller Mode
This item is used for setting the transmission rate for USB2.0 devices.
The modes include HiSpeed (480Mbps) and Full Speed (12Mbps).
The setup options are [HiSpeed] and [FullSpeed].
29
Advertisement
Table of Contents
