F_ Pa Ne L(Front-End Control Panel); I D E 1 (Wire-Harness Receptacle For Hard Disk) - OEM ITX-945GC3B N330 User Manual

7)
F_ PA NE L(Front-end control panel) (Wire-harness receptacle for floppy drive)
This receptacle is used for connecting one end of the wire harness of the floppy
drive. The other end of the wire harness will be connected to the floppy drive.
Normally, Pin 1 of the wire harness is marked with red color. Please insert into
corresponding Pin 1 of this receptacle.

8) I D E 1 (Wire-harness receptacle for hard disk)

One IDE wire-harness receptacle is set on this motherboard. Each receptacle
can be connected to one IDE wire harness and each wire harness can be
connected to two IDE devices. Insert the blue plug of the wire harness into the
IDE1 receptacle on the mother board, and insert the other end into the IDE
device. Normally, Pin 1 of the wire harness is marked with red color. Please
insert into corresponding Pin 1 of this receptacle.
13
2