Table of Contents
Advertisement
2.5 Changing the Page Format Size
The page format size determines the printable area on the page and should
match the paper size you are using in the paper tray. Table 2–1 describes
how to change the format size.
NOTE: The default paper tray size (set in the INITIAL Menu) for 120V
model printers is LETTER; for 220/240V model printers the default size is
A4. This procedure assumes that the letter-size page format is currently in
use.
Table 2–1: Changing Page Format Size
Operation
1. Press
to place the
On Line
printer off line.
– The On Line indicator
goes off.
2. Press and hold
Feeder Select
release when TRAY = LETTER
is displayed.
3. Press
repeatedly until the
Feeder Select
paper format size you want is displayed.
Wait about three seconds.
NOTE: If
is not pressed
Feeder Select
after three seconds, the value shown is
selected and the display reads 00 READY.
4. Press and hold
Reset
for about three seconds.
– The new page size
is invoked.
5. Press
to place the
On Line
printer back on line.
– The On Line indicator
lights.
and
Display Reads
00 READY
TRAY = LETTER
LETTER
#
LEGAL
#
EXEC
#
A4
00 READY
#
03 RESET
#
00 READY
00 READY
Operating Information
2–11
Advertisement
Table of Contents
