Program Updat E Port (Usb) - bon BXM-170LS Operating Instructions Manual

9. Program Updat e Port (USB)

1) Used for Firmware Update.
9-1 How to updat e t he fir mw ar e by USB por t.
Set the Update Execute to Yes, and then, exit the menu by pressing menu button.
Then, it automatically start update procedures.
-Updat e Pr ocess
HOST Updat e : SDI - 1, SDI - 2 LEDs gradually turn it ON/OFF, and when completed, it starts
Reboot (Approximately 2 minutes required)
VI PER Updat e : LEDs of below front buttons will be turning as following order, and when
completed, it automatically Reboot.
SDI - 1 - > SDI - 2 - > CVBS1,2/YC - > YPbPr/RGB - > HDMI - > DVI /VGA.
(Approximately 6 minutes required.)
1. USB Updat e File must be locat ed in t he pr iorit y folder of USB t o ex ecut e update pr oper ly.
!
2. USB Updat e Por t support USB st or ages t hat w er e For mat ed by FAT12,FAT16
or FAT32 file syst em ONLY.
3. A few of USB st or ages may not be r ecognized in BXM Monit or .
!
USB Updat e suppor t s HOST/ VI PER Updat e ONLY.
VI PER Updat e should be conduct ed by t he updat e port locat ed in t he
r ear of t he monit or
I f Monit or does not r ecognize USB pr oper ly, inser t USB st or age ahead of t ime befor e
!
Tur n t he monit or ON.
Multi Format LCD Monitor
-- 25 --
Good ex ample : I n case
proper update file is
located in the inserted
USB
Bad ex ample : I n case
Update file is not located
in the inserted USB or NO
USB inserted into the
monitor