Table of Contents
Advertisement
TA33
Motherboard User Manual /
Engineering Spec.
Chapter 2 Installations
2.1 I/O Equipment Installation
2.2 12V DC-IN
The Motherboard allows plugging 12V DC-IN jack on the board without additional
power module converter.
2.3 Serial COM ports
There are two built-in COM port (RS232/422/485 selectable; one with 9-pin D-Sub
and the other with pin-header) on TA33. When an optional touch-screen is ordered
with PPC, serial com port can connect to a serial or an optional touch-screen.
2.4 Ethernet interface
The Motherboard is equipped with one RJ-45 jack which is fully compliant with the
PCI 10/100/1000 Mbps Ethernet protocol. The LAN port also supports PoE function
(Power over Ethernet; 802.3AT).
2.5 USB ports
Six USB devices (Four with pin headers) may be connected to the system though an
adapter cable.The USB ports support hot-plug connection.
2.6 Audio function
The audio interface includes three pin-header connectors on board: two for Stereo
Speaker out (L/R) and one Mic in.
TA33 Motherboard User Manual
7
Advertisement
Table of Contents
