DSC WLS920 Installation Manual page 21

s y s t
[00] – Null Key
The key is not used and will perform no function when pressed. Each key is programmed as [00] by default.
[01]-[02]– For Future Use
[03] – Stay Arm
The system will arm in the Stay mode, meaning that all Stay/Away type zones will be automatically bypassed.
Delay type zones will provide entry and exit delay. The Quick Arm feature must be enabled in order for this key
to function (programming section [015], option [4]).
[04] – Away Arm
The system will arm in the Away mode. All Stay/Away type zones and all other non-bypassed zones will be
active at the end of the exit delay. Delay type zones will provide entry and exit delay. The Quick Arm feature
must be enabled in order for this key to function.
[05] – For Future Use
[06] – [ ] [4] Door Chime On / Off
Same as described in section 6.11 "[ ][4] Door Chime On/Off"
[07] – [ ] [6] [----] [4] System Test
This function key provides the user with a simple method for testing the system.
[08] – [15] For Future Use
[16] – [ ] [0] Quick Exit
Same as described in section 6.11 "[ ][0] Quick Exit"
[17] – [ ] [1] Reactivate Stay/Away Zones
Same as described in section 6.11 "[ ][1] Zone Bypass/Reactivate Stay/Away Zones"
[08] – [15] For Future Use
[27] – Disarm (OFF)
Disarms the system
[28] – Fire Alarm
The FAP keys are only available on the WLS909 wireless keys. These buttons must be pressed and held for
two seconds before they will activate. This two second delay is designed to help prevent accidental activation.
When the Fire keys are pressed and held for two seconds, the panel will activate the alarm output, pulsing one
second ON, one second OFF. If Fire Bell Continuous is selected the alarm output will sound until a code is
entered, otherwise it will sound until a code is entered or the alarm output times out. Communication of the
signal to central station is immediate.
[29] – Auxiliary Alarm
If the [A] Key is pressed and held for two seconds, the panel will sound three beeps to verify activation. The
panel will beep ten times rapidly to verify communication to the central station.
[30] – Panic Alarm
If the [P] Key is pressed and held for two seconds, the panel will immediately communicate the signal to
central station.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Wireless Key Buttons ..................................................... Section [804]: [65]-[68]
[P] Key Audible Bell and Buzzer ................................... Section [015], Option [2]
Fire Bell Continuous ..................................................... Section [014], Option [8]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
e m p r o g r
17
a m m i n g