DSC WLS929 Operating Instructions

WLS929
Wireless Key
OPERATING INSTRUCTIONS
The WLS929 wireless key allows you to arm
and disarm your alarm system, as well as
perform other keypad functions, from a unit
small enough to keep in your pocket.
Together with your installer, you can decide
which functions you wish to have accessible
from your portable key.
To activate any one of the four selected
functions, press and hold the appropriate
button for two seconds. Your installer will
indicate each function by applying a circular
label on the rear of the unit or by installing pre-printed buttons.
Signals will not be received if the key is not within the range
of the wireless receiver.
The default functions are as follows:
Stay Arming
Press this button to arm your system in the Stay mode. All perimeter zones will be
armed, such as all window and door contacts, but the interior zones will remain
inactive, allowing you to stay on the premises without setting off an alarm.
Away Arming
Press this button to arm your system in the Away mode. Both the interior and
exterior zones will be armed, allowing you to exit the premises.
Disarm
Press this button to disarm your system. You do not have to enter your access
code when you use the key to disarm the system.
Panic
Press this button to notify your central monitoring station of a situation requiring the
police, such as a break-in.
Other available functions (to be programmed by the installer):
• Fire
• Auxiliary
• No-Entry Delay Arming
• Chime ON/OFF
• System Test
Please discuss these options with your installer in order to program the best
possible combination to suit your needs.
front
• Command Outputs 1, 3, 4
• Command Output 2
• Quick Exit
• Reactivate Stay/Aways
back