Table of Contents
Advertisement
Record information about the EXP2500 in Table 1. You will need this information if
you have to call for service.
Table 1. Product identification record
Product name
Machine type
Serial number
EXP2500 ID number
The machine type, model, and serial number are on the label chassis flange and on
the agency label located on top of the chassis. The machine type, model, and serial
number may also be on the label located on the vertical recess on the left bezel.
The following illustration shows the product name and serial number label on the
front of the EXP2512. The locations are the same for the EXP2524.
Note: The illustrations in this document might differ slightly from your hardware.
Use Table 2 to keep a record of the hard disk drives that are installed in or attached
to the EXP2500. This information can be helpful when you install additional hard
disk drives or if you have to report a hardware problem. Make a copy of this table
before you record information in it, in case you need extra space to write new
values later, or when you update the EXP2500 configuration.
2
System Storage EXP2512 and EXP2524: Installation and Maintenance Guide
Machine type, model, and serial number
Table 2. Drive location information record
Drive location
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7
Bay 8
Bay 9
Bay 10
Bay 11
Bay 12
Bay 13
Bay 14
Bay 15
IBM System Storage EXP2512 Express Storage Enclosure or
BM System Storage EXP2524 Express Storage Enclosure
1727-HC1 or 1727-HC2
Drive part and model number
Product name
Drive serial number
Hide quick links:
Advertisement
Table of Contents
