Maintenance; Storage - WAGNER WallPerfect Flexio 995 User Manual

WallPerfect Flexio 995 WallPerfect Flexio 995
Problem
Poor covering
capacity on the wall
27.

Maintenance

Check the air filter (fig. 30, 1) after use and
replace depending on how soiled it is.
Insert a new air filter (order no. 2310 812) and
replace the lid (2).
WARNING! Never operate the
i
machine without the air filter;
dirt could be sucked in and
interfere with the function of
the machine.
To make assembly easier, apply lubricant
(enclosed) to the specified areas after
cleaning (fig. 31).
28.

Storage

After assembly, the air pipe
i
and grab handle can no
longer be separated.
Do not try to disassemble
them by force!
•
Store the device only when cleaned
properly.
•
Release the pull wire.
•
Release the trigger stop.
Cause
•
Spray material is too cold
•
Highly absorbent surface or paint
with poor covering capacity
•
Distance too large
Remedy
➞ The material you are
spraying should be at
room temperature
➞ Cross spray (Fig. 11)
➞ Closer to the object
2
1
GB D
57 57